Industrial Tunnel Continuous Microwave Dryer have food-grade SUS304 stainless steel . is a new type of heating method,with advantage of heating evenly,heating inside and outside the material simultaneously,Energy-saving more than 50%. The material to be dried is uniformly distributed on the conveyor belt through the feedingt device.The whole material is heated by the microwave drying device to inscrease the temperature of the material,and the interial,and the internal moisture of the material is diffused outward.
Industrial Tunnel Continuous Microwave Dryer is used to dry material in a short time. It can change to be heat within several seconds, so the equipment is very efficient. More importantly, it will not generate extra heat and pollution.
List of raw materials for industrial tunnel continuous microwave dryer | |
Industry applications | Products and raw material |
Agricultural and sideline products | Mealworms,black soldier fly;Cat litter,tobacco leaf,Artificial rice,edible fungi,breadcrumbs,Cheese slices |
Flowers and leaves | Honeysuckle, chrysanthemum, honeysuckle leaf, tea, wheat seedling, highland barley seedling, Kuding, dandelion, hibiscus flower, rose, saffron |
Chemical industry | Powder puff, sand core, corn starch, paper tube, paper holder, calcium chloride dihydrate, silicon carbide ceramic membrane, industrial sodium chloride, catalyst, carbon fiber, glass fiber, monocrystalline silicon, industrial salt, resin, molecular sieve, active carbon, bentonite |
Building materials industry | Perlite board, foam insulation board, wood, plywood, adhesive board, glass fiber cloth. |
Textile industry | Yarn, cotton, wool |
Pharmaceutical industry | Pills, capsules, tablets, gloves, masks |
Condiments |
Chili powder, pepper, pepper, cinnabar, root, spices,etc |
Working principle diagram of Industrial Tunnel Continuous Microwave Dryer
Equipment model of Industrial Tunnel Continuous Microwave Dryer
Model |
Size L*W*H(Can be customized according to the customer's requirements) |
Output power |
LY-10KW |
5000mm*825mm*1750mm |
≥10KW |
LY-20KW |
8000mm*825mm*1750mm |
≥20KW |
LY -30KW |
8500mm*1160mm*1750mm |
≥30KW |
LY -40KW |
10000mm*1160mm*1750mm |
≥40KW |
LY -50KW |
12500mm*1160mm*1750mm |
≥50KW |
LY -60KW |
13500mm*1450mm*1750mm |
≥60KW |
LY -70KW |
13500mm*1500mm*1750mm |
≥70KW |
LY -80KW |
13500mm*1650mm*1750mm |
≥80KW |
LY -100KW |
16800mm*1650mm*1750mm |
≥100KW |
LY -150KW |
22400mm*1850mm*1750mm |
≥150KW |
LY -250KW |
27000mm*1850mm*1750mm |
≥250KW |
LY -300KW |
32000mm*1850mm*1750mm |
≥300KW |
The advantages of Industrial Tunnel Continuous Microwave Dryer
1.Continue dry model,convenient with high capacity.
2.Microwave penetrates through the material and affect it from inside and outside at the same time, resulting in rapid drying speed, short drying time, uniform heating and good product quality.
3.Thermal effect and non-thermal effect works together for sterilization, which is quick and of low temperature. The flavor and nutritional components of material are retained to the maximum.
4.Microwave works directly on the food, there is almost no other heat loss, it is of high thermal effciency and saves 1/3 energy comparing with far-infrared heating.
5.Small land occupation, saving labor. No heat radiation, the working conditions are greatly improved.
6.Immediate heating and stop by adjusting the microwave power, no thermal inertia, easy to control, convenient for automatic and continuous production.
Finished Samples Pictures
Main Technical Parameters
Power supply |
380V 50HZ three-phase five-wire(Can be customized) |
Microwave output frequency |
2450±50MHz |
Microwave input apparent power |
≤70KVA |
Microwave output power |
≥50KW |
Microwave power adjustment range |
0-300KW(adjustable) |
Temperature |
0~200C(adjustable) |
Equipment type |
Transmission Teflon conveyor belt |
Transmisison speed |
0~10m/min(adjustable) |
Microwave leakage limit |
(mW/cm2):<1 |
Magnetron |
Toshiba/Samsung |
Material |
Food grade stainless steel |
Dimension(L*W*H) |
Customized |
Questions and Answers:
1.What is tunnel drying?
Industrial Tunnel Continuous Microwave Dryer is a mechanical device that uses heat to reduce the moisture of materials and is used for drying objects. Tunnel dryer is a kind of direct continuous dryer. This is the largest dryer. Principle: In this dryer, the material to be dried is sent to the air heating channel for drying. The material enters at one end and the dry material collects at the other end of the tunnel.
2.What is an industrial microwave?
Industrial microwave oven refers to the microwave cavity and high-power microwave oven, the power is generally more than 6kW, which can be continuously produced for 24 hours, which is mainly used in the experimental equipment of scientific research institutes and production in factories.
It can be used for heating, sterilization, drying, baking, catalysis, extraction, etc. In the case of uniform load distribution in the Industrial Tunnel Continuous Microwave Dryer, the multi-mode cavity forms uniform heat distribution in the whole microwave oven.
Our Service & Customers
We provide Satisfied Industrial Tunnel Continuous Microwave Dryer Service and Turnkey Solution for you .
1. Microwave Dryer Pre-shippment Inspection
a.) Supplier should trial run whole line at supplier's factory before shipment;
b.) Supplier has to run the machine at least 1hour for each machine;
c.) All raw materials for that trial run to be arranged by supplier at their cost.
2. Microwave Dryer Service&Guarantee
a.) Free consultation service before, during, and after sales;
b.) Free project planning and design services;
c.) Free debugging of equipment until everything is functional;
d.) Free management of equipments' long distance shipping from seller's factory to named place by buyer;
e.) Free training of equipment maintenance and operating personally;
d.) Free new production techniques and formulas;
e.) Provide 1 year complete warrantee and life-time maintenance service;The seller is responsible for the nature damage of the machinery in one year except for man-made damage.
All spare parts and wearing parts are attached with the machinery for free; and these parts should be enough for one year use.