Main Industrial Size Microwave Heating Equipment In Food Processing Electrical Components

Outer Main Frame Part

On the basis of the original industrial microwave equipment, it is thickened (50*100 carbon steel square tube), manufactured according to the buyer's requirements, and sprayed with the specified color (or 50*50 stainless steel square tube). A quick connection device is used at the connection of the base frame.

Microwave Heating System

There are 8 sets of automotive microwave heating box, made of 1.5mm stainless steel plate.

In order to facilitate cleaning and operation, the cabinet has an observation and cleaning port.

The cabinet frame is designed and manufactured with 1.5mm thick stainless steel pipe

Microwave Source System

The industrial microwave generator adopts Japanese Toshiba water-cooled magnetron, the top broadband phase feed, and the generator cooling tube is connected with copper pad.

The microwave oil-immersed power switch is designed separately for the power supply bracket and adopts air-cooled cooling method. Equipped with a high-power centrifugal fan for efficient heat dissipation.

Microwave Suppression System

industrial strength microwave

The feed end is equipped with a microwave suppressor with a length of 1200mm and an opening of 50mm high to prevent microwave leakage.

The discharge end is equipped with a microwave suppressor with a length of 1200mm and an opening of 50mm in height to prevent microwave leakage.

Transmission System

The output power of the transmission motor: 2.2KW, controlled by the frequency converter, the transmission speed is adjustable;

Using thick, wear-resistant and high-temperature resistant PTFE conveyor belt, the width of the conveyor belt is about 1000mm.

Equipped with a lack of material alarm system, sound and light alarms when there is no material in the hopper, and can automatically shut down the microwave.

Cooling And Dehumidification System

There is a moisture exhaust port on the top of the heating box to drain away water vapor in time. Two 1.5KW environmentally friendly low-noise centrifugal fans are selected and connected to the power supply frame to ensure timely heat dissipation of the electrical appliances.

The user of the external pipeline shall handle it on site.

Control And Detection System

The equipment control system adopts intelligent PLC one-key control mode. The power of the whole machine, the transmission speed of the material and the temperature can be operated on the PLC,

Central control system: PLC control, touch screen operation; all are controlled by Xinje series programmable controller,

Each group of magnetron circuits work independently, even if one group does not work, the others can work normally without affecting the use